Flexible Solar Cell Roof Shingles Unveiled
A transparent thin film barrier used to protect flat panel TVs from moisture could become the basis for flexible solar panels that would be installed on roofs like shingles.
The flexible rooftop solar panels – called building-integrated photovoltaics, or BIPVs – could replace today’s boxy solar panels that are made with rigid glass or silicon and mounted on thick metal frames. The flexible solar shingles would be less expensive to install than current panels and made to last 25 years.
‘There’s a lot of wasted space on rooftops that could actually be used to generate power,’ said Mark Gross, a senior scientist at the Department of Energy’s Pacific Northwest National Laboratory. ‘Flexible solar panels could easily become integrated into the architecture of commercial buildings and homes. Solar panels have had limited success because they’ve been difficult and expensive to install.’
Researchers at PNNL will create these flexible panels by adapting a film encapsulation process currently used to coat flat panel displays that use organic light-emitting diodes, or OLEDs. The work is made possible by a Cooperative Research and Development Agreement recently penned between Vitex Systems and Battelle, which operates PNNL for the federal government.
PNNL researchers developed the thin film technology in the 1990s. At the time, the lab’s team investigated 15 possible applications, including solar power. Vitex licensed the technology from Battelle in 2000 and focused its initial efforts on developing the ultra-barrier films for flat-panel displays. Now PNNL and Vitex are taking a hard second look at solar power.
The encapsulation process and the ultra-barrier film – called Barix™ Encapsulation and Barix™ Barrier Film, respectively – are already proven and effective moisture barriers. But researchers need to find a way to apply the technology to solar panels that are made with copper indium gallium selenide, called CIGS, or cadmium telluride, called CdTe.
Under the agreement, researchers will create low-cost flexible barrier films and evaluate substrate materials for solar panels, which are also called photovoltaics, or PVs. Both the film and substrate must be able to survive harsh ultraviolet rays and natural elements like rain and hail for 25 years.
The agreement also calls for researchers to develop a manufacturing process for the flexible panels that can be readily adapted to large-scale production. If successful, this process will reduce solar panel manufacturing costs to less than $1 per watt of power, which would be competitive with the 10 cents per kilowatt-hour that a utility would charge.
‘Vitex is proud to continue its long, successful relationship with PNNL,’ said Martin Rosenblum, Vitex’s vice president of operations and engineering. ‘Vitex is excited to further its Barix™ technology’s proven barrier performance for photovoltaics toward mass manufacturing. Together, we look forward to creating a product that will help alleviate America’s dependence on foreign oil and increase America’s access to an abundant renewable energy source – the sun.’
Battelle, which is the majority shareholder of Vitex, is optimistic that this research agreement will contribute to a new way of generating solar power. Battelle recently increased its investment in Vitex for new state-of-the-art thin film encapsulation equipment and expanded its intellectual property portfolio.
‘We’re confident that Vitex will be uniquely positioned to help meet the demand for flexible solar panels, OLED displays and lighting that should rise along with the economy,’ said Martin Inglis, Battelle’s chief financial officer.
PNNL’s research efforts will be paid for with up to $350,000 from the DOE’s Energy Efficiency and Renewable Energy Technology Commercialization Fund. Last year, DOE announced that up to $1.5 million from the fund would be available to PNNL for projects that help commercialize technologies that reduce energy use or tap renewable energy sources. Because the fund requires commercial partners to match funding, Vitex will provide up to $350,900 of in-kind labor, equipment and materials for this project.
This is absolutely fantastic! The 25-year lifespan is terrific! I’d like to know (I suppose a lot of other folks would also) when these might become commercially available. I’d love to be able to let potential buyers of lots in my green subdivision in NH know about this.
Yes, a pure fantasy, thus, fantastic. In 25-years, when they have proven the 25-year lifespan, then, maybe, we will believe. In the mean time, real solar PV panels with 10.4% efficiency on panel level (and close to 20-year proven life) already sell below $2 per Watt. This flexible “technology” might have had a chance, if it were developed 10 years. Too late now.
I like your style, the fact that your site is a little bit different makes it so interesting, I get fed up of seeing same-old-same-old all of the time. I’ve just stumbled this page for you
It is amazing to me just how many people are unaware of the energy challenges that we face. Its truly troubling that so many of us either think that there is an unlimited supply of good clean energy, or just do not think about it at all. For others, solar alternatives, as well as many new technologies represent a bright light at the end of a very dark tunnel. I admire anyone, who in either a big or small way, takes their valuable time to educate everyone about their individual opportunities and responsibilities when it comes to our future, and our childrens future. When we look back twenty years from now, it will almost be unbelievable that we were even engaged in this debate. Our energy future is a forgone conclusion, and we all have a role to play in advancing us toward it.
For the benefit of mankind and is beneficial to the environment, good! Should have more people to join!
Hi there, ive recently just been shocked at my electricity bills lately, paying way too much. I think solar energy is the way to go, easy to set up and pretty self explanatory. Well, Cheerio!
Efrain Ruane
I have just lately started off a weblog, the information you supply on this site has assisted me extremely. Appreciate all of your time & work.
I understand that but where does it take us?
The shortest distance between two points is under construction.
was noticing the way, beneficial, topic in the process,
It doesn’t make sense to use LEDs anymore with these things out!
Hi, i think that i saw you visited my blog thus i got here to ¡§return the want¡¨.I am trying to find things to improve my site!I suppose its adequate to make use of a few of your ideas!!
Extra Autoreifen
I’ve said that least 2445175 times. The problem this like that is they are just too compilcated for the average bird, if you know what I mean
marvellous
I function for a company that is wanting to e-mail some of our media contacts from our Press Release weblog posts. The main issue I’m running into is obtaining a service that doesn’t call for opt-in. Does anybody have any suggestions?.
I have not checked in here for a while as I thought it was getting boring, but the last few posts are great quality so I guess I¡¦ll add you back to my everyday bloglist. You deserve it my friend
Oh my goodness! an amazing article dude. Thank you Nevertheless I am experiencing concern with ur rss . Don’t know why Unable to subscribe to it. Is there anybody getting identical rss downside? Anybody who knows kindly respond. Thnkx
I am experiencing a challenge with your rss feed . Don’t know why I am not able to subscribe to it. Is there anybody getting an identical rss problem? Anybody who is aware of kindly respond. Thanks
Thank you for the auspicious writeup. It in fact was once a amusement account it. Glance complicated to more brought agreeable from you! By the way, how could we keep in touch?
My brother suggested I may like this website. He used to be totally right. This put up truly made my day. You cann’t believe simply how so much time I had spent for this info! Thank you!